Alpacino HueForge Portrait - Free 3D Print Model

Search models, users, collections, and posts

user_791826547

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.04mm layer, 1 walls, 100% infill

Designer

2.7 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Description

Alpacino's portrait with HueForge.

The file should be ready to be sliced, printed with Bambulab X1C, so if you want to print with different printer, plate or colour, make the necessary adjustments.

Instructions:

Project: Alpacino.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 107.3x150mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.1mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA Bambulab Basic Dark Grey Transmission Distance: 5 (Actually Sunlu PLA+ Dark Grey)
    PLA BambuLab Matte Ash Gray Transmission Distance: 1.4
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #7 (0.48mm) swap to Dark Grey
    At layer #22 (1.08mm) swap to Ash Gray
    At layer #30 (1.4mm) swap to Ivory White for the rest.

Can be done with other colours too but I prefer matte as the colours are more settle and you can see it better.

If you are not sure or you need any help do not hesitate to contact me.

Boost Me (for free)

If you like my work, boost me :)