Search models, users, collections, and posts
Bambu Lab - USB Speed Controller Case
IP Report
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
24 min
1 plate
Open in Bambu Studio
Boost
20
39
34
12
105
96
Released
Description
If you've purchased the Bambu Labs Speed Controller, like me you'll notice it doesn't have a case, so I designed one that hardly adds any bulk to it, but protects the internals. It uses the hardware that comes with the controller.
To assemble:
- Screw the support pillars to the fan speed plastic/glass cover using the supplied hardware. (as shown in the picture)
- Insert into the case the panel supplied (not the metal one) (see picture)
- Insert the controller into the case, USB male connector first. It's a snug fit so you may need to manouver it a little.
- Put on the plastic glass cover, then screw it from the bottom using the provided screws.
- …and voila!
Feedback is always welcomed :)
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (34)