scottsketchbook

cover

step 1.png

2.png

step 3.png

step 4.png

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

2025-01-17_e409a0472a141.png

Please Follow the instruction of all assembly, and third party product.

0.12mm layer, 2 walls, 15% infill

Body (with Support) - 275%

Legs and Nose - 275%

Hat - 275%

Chest (with Support) - 268%

Stand (Optional) - 275%

SINTAX

IMG_1845.jpeg

Screenshot 2025-01-20 at 7.36.07 AM.png

Screenshot 2025-01-19 at 12.02.01 AM.png

I used the original authors settings and then made some changes based on both necessity to print properly as well as my preferences. The major changes are as follows:<ul><li>Upscaled the overal size to 275%. He now stands 13.25&#34; with his hat on.</li><li>After two print failures, I updated the supports on the main body. They remove without a trace using Bambu Matte PLA.</li><li>I printed the white chest piece vertically for a smooth finish. I had to scale it to 268% due to the “press fit”. Your tolerances may vary.</li><li>0.16mm &#34;Optimal&#34; Layer Height with Bambu Cool Plate SuperTack</li></ul>Plates are broken down by color as can be seen the attached photos.

Upscaled to 275% with Updated Supports

Body with supports

Legs

Chest with supports

Beak

DarkB_CZ

IMG_8576.jpeg

Snímek obrazovky 2025-03-19 190227.png

All parts was resized to fit A1 Mini build height (body height is 173 mm, full model height is 249 mm). There is no need for the stand.<ul><li>Body - 2 walls, 5% gyroid infill, supports under wings, slowed down middle part of the body for more consistent surface finish</li><li>Legs - 3 walls, 5 % gyroid infill, no hole in the other leg, variable layer height for less visible steps</li><li>Hat - 3 walls, 5% gyroid infill, the hole inside is in the shape of the head for better fit</li><li>Belly - 3 walls, 5% gyroid infill, supports, little smaller than 200% for easier snap fit</li><li>Beak - 3 walls, 5% gyroid infill, you must use glue</li></ul>

A1 Mini, 249 mm height, 0.16mm layer, 2-3 walls, 5% infill

Feathers McGraw, a classic character from Wallace and Gromit. This is a 6 piece set and easy to assemble.&nbsp;Please make sure in the file your printer and plate type are correct.&nbsp;Enjoy!&nbsp;&nbsp;

Feathers McGraw

ASIA

Print Profile(3)

Description

Comment & Rating (403)

License

Related Models