Darkwing Duck HueForge - Free 3D Print Model

Search models, users, collections, and posts

Retroperspektive42

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

4.5 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

103

Released

Description

Project: DarkwingHUE.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 158.29x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Matte Dark Blue Transmission Distance: 1
    PLA BambuLab Tough Lavender Blue Transmission Distance: 2
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA Jessie Premium Purple Ice Transmission Distance: 18
    PLA PolyLite Grey Transmission Distance: 1
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA PolyLite White Transmission Distance: 5
This print uses 8 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Dark Blue
    At layer #11 (0.96mm) swap to Lavender Blue
    At layer #16 (1.36mm) swap to Blue Gray
    At layer #17 (1.44mm) swap to Purple Ice
    At layer #19 (1.6mm) swap to Grey
    At layer #20 (1.68mm) swap to Yellow
    At layer #26 (2.16mm) swap to White for the rest.