Stackable Drawer Storage Box (with Optional Removable Dividers)

This is a stackable drawer storage box, the dividers are removable and independent, you can decide whether to print them as needed.

Be careful when installing the drawer cover, the snaps are quite fragile. However, even if they break, you can fix them with glue.

In addition, there is an overhang on the box body, and no supports are set (too much material, and difficult to remove), but it is located on the inside (invisible from the outside), so printing defects are not a big problem, basically not affecting the appearance or usage.

The box body is relatively large, and needs to be sliced to print if using an A1 mini. You will need glue to assemble it after printing.