Baratza Vario plus - Single dose hopper adaptor

Design intent

• Could not find a single dose hopper with bellows at a decent price on the market for the Baratza Vario plus grinder.  They are quite expensive
• Wanted to keep a silicone bellows (and not a printed one, which won't last long)
• This is the bellows and cap I am using (I discarded the adaptor):   https://www.amazon.ca/dp/B0B1TSKT11
• If you find a different size bellow, use the STEP file to modify for the proper diameter
• If you don't feel at ease with plastic in contact with your coffee, this mod might not be for you

Printing notes (if you are not using the provided print profile, follow these instructions)

• STL is oriented correctly
• Add manual tree support on the 2 small surfaces of the side tabs
• Optional:  Add “Internal Brim only” of 5mm with a 0.1mm gap to guarantee proper bed adhesion.  The surface touching the bed is not that big
• 0.2 layer, 0.4 width, no infill is used
• I printed in ASA but any material would work