Search models, users, collections, and posts
Wrapping Paper Cutter
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 25% infill
2.2 h
1 plate
Open in Bambu Studio
Boost
187
535
10
6
304
176
Released
Description
DISCLAIMER
The knife inserting system damages the blade apex and may make the paper difficult to cut.
Please consider my Version 2 with a reworked knife inserting mechanism that does not involve touching the edge.https://www.printables.com/model/1109351-wrapping-paper-cutter-v2
================================================================
Idea taken from an Aliexpress product, recreated for 3d printing I also slightly scaled up the model to fit some larger-than-standard rolls. Max is 45mm
Hardware:
1x new craft knife blade (number 11)
Best results with a smaller nozzle.
Take caution when inserting the knife. It is press-fit, and requires a little bit of force to push it in all the way. I used some thin needle-nose pliers to get it in without pushing on the blade. Since making this, i have also uploaded a tool to safely and easily insert the blade.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (10)