Search models, users, collections, and posts
Print Profile(4)
AMS - 0.2mm Nozzle - 0.08mm layer - 2 walls - 100% infill
Designer
1.9 h
1 plate
NO AMS - 0.4mm Nozzle - 0.08mm layer - 2 walls - 100% infill
Designer
52 min
1 plate
AMS - 0.4mm Nozzle - 0.08mm layer - 2 walls - 100% infill
Designer
54 min
1 plate
NO AMS - 0.2mm Nozzle - 0.08mm layer - 2 walls - 100% infill
Designer
1.8 h
1 plate
Open in Bambu Studio
Boost
17
44
1
1
21
8
Released
Description
3D Printing Instructions and Details :D
This model was printed with 100% infill and a layer height of 0.08mm, with the first layer set to 0.16mm for a strong and smooth foundation.
- Model Dimensions: 90x90mm
- Minimum Printable Layer Height: 0.56mm
- Maximum Depth: 2.1mm
- Actual Depth of the Model: 2.1mm
Filaments Used:
This print uses 3 unique PLA filaments from GeeTech (You should use other Filaments, but Geetech is the cheapest one for me):
- Red: Transmission Distance 2.5
- White: Transmission Distance 5.6
Swap Instructions:
- Begin the print using Red filament.
- At layer #17 (1.44mm), swap to White filament.
This ensures a precise multi-colored print with smooth transitions at the specified depths.
You can use this print however you want without paying or asking.
If you do have Questions or feedback, dont hesitate to write a comment or message me directly.
Greetings Joshua
Boost Me (for free)
Support this project and help it grow! Click now to boost and help me make mor designs for free!
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (1)