Search models, users, collections, and posts
Housing for the Shelly Mini Series
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
46 min
1 plate
Open in Bambu Studio
Boost
1015
3842
146
85
1.7 k
1.2 k
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
List other parts
- Cable tie 2.5mm x 2:
- WAGO Clamp 221 x 3:
Description
An easy-to-print housing for the Shelly mini 1, mini 1PM, and mini PM.
The housing has space for up to 3 WAGO 221 clamps.
The cables are neatly and securely fixed with cable ties.
The reset button and the LED are accessible and visible.
Size: 80x38x20mm
For assembly, you will need:
4 pcs M3 brass inserts (M3x5x4 or M3x5x4.2)
4 pcs M3x6mm countersunk screws
2 pcs 2.5mm cable ties
2 or 3 WAGO 221 clamps
have fun!
8.03.2025
Upon Request: I have made a slightly bigger version of the base-part to better support thicker cables. If you use the PM with 16 Amps you should use at least 1.5mm2 (AWG14) cables.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (146)