PBPopcorn

cover

IMG_0948-ezgif.com-video-to-gif-converter.gif

plate_1.png

2025-01-20_1c096091b8131.gif

0.2mm layer, 2 walls, 15% infill&nbsp;Use support

0.2mm layer, 2 walls, 15% infill

No AMS block

plate_2.png

No AMS Question Marks

plate_3.png

(OPT) No-Question-Mark cover

plate_4.png

msgpack3t

PXL_20250726_010256947.jpg

PXL_20250726_010426279.jpg

overhangs.png

Trying the address some of the suggestions/issues in the comments<ul><li>for no-AMS printing, negative parts added for question mark indents.  On the sides of the cube the overhang in the center of the question mark does not print perfectly (for me at least) so you may have to shave it a bit for the question mark to be vertical.</li><li>the question marks are intentionally made taller on the Z-axis because I like them sticking out of the block more.  You can adjust them if you want them more flush against the block.  Also made them -0.2mm in XY-contour compensation so they would drop into the indents easily.  In the picture you can see it is not quite a friction fit - these will almost certainly require glue, but you might get lucky.  Change this setting depending on the tolerances of your printer.</li><li>added a moat so that the switch pins don&#39;t have to be removed or bent.  The switch is a very tight fit, so you will have to pry it out with sharp/narrow tweezers or something of the sort.  I could have added a hole through the bottom like some other models but I wanted to keep the designer&#39;s dogs logo out of respect.</li></ul>Added optional top face without a question mark (since that is the Nintendo design).  Also considered adding the rivet holes in the corners of the block faces, but that is an exercise for another day.

Indents for question marks, space for pins, 50% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Mario question block clicker fidget. &nbsp;Two ways to print. With question marks separate so no AMS is needed and with them attached.&nbsp;Requires switch like Cherry MX. I use these <a target="_blank" rel="noopener noreferrer ugc" href="https://a.co/d/a2fQt6Q">https://a.co/d/a2fQt6Q</a>

Mario question block clicker fidget

ASIA

Print Profile(2)

Description

Comment & Rating (92)

License

Related Models