3D Printed Valentine's Day Cards - Mega Pack
Print Profile(5)
Description
This is a 3D Printed Valentine's Day Cards - Mega Pack
after many hours of design, printing, and testing, we are happy to announce our new project, 3D Printed Valentine's Day Cards.
This page will continue to get updated to have as many card designs as we can.
Looking for a Valentine's Day gift for your significant other? bored with all the same old Valentine's Day Cards?
This is the project for you!
Why choose my design?
- Fully tested - every design is fully tested to make sure everything works.
- Thin - the cards are as thin as paper, thus making it perfect as a paper card replacement.
- PLA - since the card is not paper, it's water-resistant and will stay with you forever.
- Printing in mind- No support is needed, design to minimize multicolor filament waste
Print Settings
- Material: PLA
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Vertical Walls: 2-3
- Infill: 15%
- Supports: None
Assembly instructions:
1. get the 3d printed parts, and a piece of filament.
2. Get a blowtorch or a lighter, carefully heat the filament, and slowly try and straighten it.
3. slide the filament into the hinge, and use flash cutters to cut the excess filament. you can also add a drip of glue to make sure the filament will stay in place, but you don't have to.
If you print one, please share your results with us! and happy printing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (20)