Skulls N' Roses - Bookmarks Set

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

Introducing Skulls N' Roses, a bold and striking bookmark set that's easily one of my all-time favorites! 🌹💀 These bookmarks combine intricate skull designs with vibrant red roses and lush green leaves, creating a perfect balance of edgy and elegant.

Not gonna lie—this set was the hardest and most time-consuming bookmark project I’ve ever made. From the fine details in the skulls to the vibrant layering of colors, each bookmark feels like a little piece of art.
 

Oh, and if you're wondering—yes, the name is a nod to Guns N' Roses. Except these won't "rock you like a hurricane," but they might rock your books! 🎸📖
 

Whether you're into gothic vibes or just love a dramatic flair, these bookmarks will definitely make your reading time unforgettable. What do you think? 😊

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

• NOW WITH 0.2 NOZZLE PROFILE READY FOR DOWNLOAD - USE FOR BEST RESULTS
   

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Black Transmission Distance: 0.3 / Amazon
PLA BambuLab Basic Green Transmission Distance: 2 
PLA EryOne Rose Red Transmission Distance: 2.2 / Amazon
PLA Geetech Matte Light Gray Transmission Distance: 0.8 / Amazon
PLA KINGROON WHITE Transmission Distance: 6.9 / Amazon

Color Pallete:

Swap Instructions:

Start with Black
    At layer #8 (0.73mm) swap to Green
    At layer #10 (0.89mm) swap to Rose Red
    At layer #15 (1.29mm) swap to Light Gray
    At layer #17 (1.45mm) swap to WHITE for the rest.

 

How to do more than 4 colors on a single AMS?

To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges.

Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS:

Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4
Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again!

This will allow you to Change the rolls of filament once the printer is done with that color.
For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need!
YOU CAN PLACE A PAUSE ON THE LAST LAYER OF COLOR 4 TO AVOID HAVING TO BABYSIT THE PRINTER. ONCE PAUSED CHANGE 1-2-3 WITH 5-6-7 AND RESUME. IF YOU NEED MULTIPLE PAUSES YOU CAN DO THAT TOO

Drop me a follow!🤜🤛