EZWorld

cover

IMG_20231222_161604_4f8973fd-c981-4c2a-8740-f415518a6175.jpg

IMG_20231222_163045_ef0c338c-cd7a-479d-80b6-f765b726a0e3.jpg

IMG_20231220_214334_a7723830-1bfb-4bb5-a8e0-205e7bd8bfe2.jpg

IMG_20231222_161927_582fc9f4-da53-46ca-a06c-b13a7b6b4c27.jpg

plate_1.png

IMG_20240506_152902_5bf6eebb-492d-4f12-86b0-89bbd0288b4a.webp

Dragon Egg Top with Thicker Ring_f17ca43f-1e60-4440-8b9b-58cb5d27452e.webp

IMG_20240506_153107_2d0704be-4012-4c15-a8c1-14573bf226c0.webp

plate_1.webp

I tested the model using Bambu Green PLA on my P1S printer.Default 0.2mm Standard @BBL X1C was used except for the internal solid infill patter as well as the sparse infill pattern was changed to be monotonic line and aligned rectilinear for easier printing.

Thicker ring, 0.2mm layer, 2 walls, 15% infill

IMG_20231222_161058_d8976b3f-90e6-4e3f-8c8c-88aa6453b45b.webp

I tested the model using PETG on my P1S printer. Default 0.2mm Standard @BBL X1C was used except for the internal solid infill patter as well as the sparse infill pattern was changed to be monotonic line and aligned rectilinear for easier printing.

0.2mm layer, 2 walls, 15% infill

Threaded Dragon Egg, Great for Easter and Gifts

I added a keychain hole to the top of the threaded dragon egg so that it can be used as a Christmas tree decor or keychain accessory. The original creator for the threaded dragon egg is <a target="_blank" href="https://makerworld.com/en/models/395708#profileId-452150" rel="nofollow noopener">Tony Youngblood</a>.And the little dragon can be found <a target="_blank" href="https://makerworld.com/zh/models/13155#profileId-13153" rel="nofollow noopener">here</a>.

Threaded Dragon Egg with Keychain hole

ASIA

Print Profile(2)

Description

Comment & Rating (69)

This remix is based on

License

Related Models