filament spool Adapter

Are you troubled by the incompatibility between the filament spool and the AMS during 3D printing? This exquisitely designed 3D printed Cardboard Spool Adapter model is an excellent solution to this problem. It is specifically designed to fit filament spools with an aperture larger than 56mm.

this model requires only 98g of printing materials and takes about 3 hours and 44 minutes, which is efficient and cost - effective.

Printing Tips: To ensure print quality, make sure the printing platform is clean and free of dust and debris before printing.

Printing Tips: As some parts of the model have a small contact surface with the heated bed, they may detach from the heated bed during the printing process. To increase the printing success rate, please clean the printing plate with dish soap and spray glue before printing. Using a low - temperature warming printing plate can significantly enhance the printing success rate.

Feel free to leave a comment if you have any suggestions or questions about the model. When problems occur, please tell apart whether the issue is caused by the model itself, the printer, the filament, or improper operation and installation on your own part. I will block users who blindly attribute printing failures to the model and leave a one-star rating simply because they are unable to troubleshoot and fix problems by themselves. Such behavior greatly undermines the efforts of open-source creators.

有任何关于模型的建议或疑问，欢迎评论留言。出现问题时，请先区分原因：是模型本身、打印设备、耗材，还是个人操作与安装不当造成的。对于自身没有排查和解决问题的能力，却一味将打印失败归咎于模型并给出一星差评的用户，我将进行拉黑处理。这类行为会严重辜负开源创作者的心血与付出。