Fallout 4 Inspired VAULT-TEC Nixie Tube Clock
Print Profile(1)
Bill of Materials
Description
Fallout 4 inspired VAULT-TEC Nixie Tube Clock
Bring the retro-futuristic aesthetic of Fallout 4 into your home with this VAULT-TEC-themed Nixie Tube Clock. This 3D printable design is both functional and decorative, making it a perfect project for fans of the Fallout series or vintage electronics enthusiasts.
Designed to fit on Bambu Lab A1 mini bed.
Boost Me (for free)
Need a boost to your S.P.E.C.I.A.L.? Boosting this model won't actually improve your stats, but it will give me the Strength to keep creating cool stuff! Consider it a moral boost.
UPDATES:
2025-01-23: Raw model files now includes front and back panels with graphics removed for your customization.
Printing Instructions
- Orientation:
- Use the orientation provided in the .stl files for optimal results. The body is designed to maintain a natural curve when printed in its default orientation.
- Supports:
- Required for the slits and stand-offs in the body.
- Optional for the holes, depending on your printer's capabilities.
- Fit and Tolerances:
- Decorative copper rings are press-fit but can be secured with a dab of super glue if necessary.
- Standoffs are also press-fit.
- Tight tolerances are used for the copper rings, which have an outer diameter of 23 mm.
Assembly Instructions
- Prepare Components:
- Insert the Nixie tubes into their designated seats (Thingiverse model used).
- Solder the Nixie tubes but leave the indicator neons unsoldered at this stage.
- Assemble Body:
- Attach the back panel to the non-slanted side of the body. Slide in the first corner, then bend to fit another.
- Press-fit or glue the copper rings and inserts into place.
- Install Electronics:
- Carefully slide the circuit board into position, ensuring the tubes align properly.
- Insert and isolate wires for the neons before soldering them. Keep the front panel off for easier access during this step.
- Finalize Assembly:
- Attach the front panel once all wiring is complete.
- Secure the bottom lid using screws. Take note of the FRONT indication.
Notes
If your neon indicators do not come with pre-installed 220k Ohm resistors, you will need to solder one onto one of their leads before installation.
Parts List
- Nixie Tube Control Board (USB): Available on AliExpress
- IN-14 Nixie Tubes: Available on AliExpress
- Indicator Neons: Available on AliExpress
- 220k Ohm Resistors: Available on AliExpress
- Decorative Copper Rings: Available on AliExpress or AliExpress
- M3 x 16 mm Screws: Available on AliExpress or Maker's Supply
- M5 Heat-Set Inserts for Columns: Available from Ruthex
Filaments Used
- Filalab PLA Marble
- Filalab PLA White
Rosa3D PLA Starter Black
Enjoy building your very own VAULT-TEC Nixie Tube Clock and let it add a touch of post-apocalyptic charm to your space!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (58)