a somewhat toonified Delorean
Print Profile(3)
Bill of Materials
Description
A floating Delorean
I was intrigued by this idea when I first saw the Magnetic Levitation DIY Kit in the store. I had also wanted to realize a toonified model of the Delorean for a long time and so it was clear that both wishes would fit together perfectly.
I realized the whole project to the best of my ability and tried to design it in such a way that it could also be copied by others. Here and there there may be small irregularities, but I have tried to explain it as well as possible in the attached instructions and hope that there are few problems.
It was not easy to implement this idea and I would like to emphasize that small differences may occur here and there due to different settings or filaments. I made an effort to try everything out until it worked for me. Unfortunately, this does not mean that it will be the same for everyone. However, I also explain here how you can at least use a few little tricks here and there to solve small problems.
Tools
You only need a standard tool for processing.
- Cutter Knife
- file for sanding or sandpaperfile
- superglue is
- fine pliers
The Base
Let's start with the base, which is still quite easy to implement. Printed in PETG HF, as the coil can get quite warm if you make a mistake. You should definitely stop after a few failed attempts and let everything cool down first.
The rest is all in the assembly instructions
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (82)