Flush Fit Dual Anti Vibration Feet
Print Profile(1)
Bill of Materials
Description
I wasn't satisfied with the standard Bambu Lab anti-vibration feet, and I couldn't find any replacements that I liked…. so I made my own.
These are dual feet, so they utilize all 8 of the anti vibration feet that come in the pack from Bambu.
I designed the feet holders to be as low profile as possible along with being flush fit. (The vibration feet already add a bit of height to the printer, and I didn't want to make it any taller.
I did not calibrate my printers after I installed the feet, and my prints look the same, but if you see print quality issues, I would run the calibration again with the new feet on.
PLEASE NOTE: There are two different holders, a set for the front left and back right of the printer and a set for the front right and back left of the printer. All of the holders you need are on one plate in bambu studio. Just hit print and you should be good to go.
Will only work with the new anti-vibration feet: https://us.store.bambulab.com/products/anti-vibration-feet
Boost Me (for free)
If my design helped you out , I would be extremely grateful for boost. 🙏 It helps me continue to make more free designs! Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (661)