Search models, users, collections, and posts
Bambu Lab A1 build plate aligner
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
27 min
1 plate
Open in Bambu Studio
Boost
2208
6067
347
47
5.5 k
4.2 k
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Bambu Filaments
Select all
Description
Bambu Lab A1 build plate aligner with brush support. You will need 2x m3 screws with flat head to secure them. Also use some heat resistant material for 3d print (ex. ABS) because PLA will melt fast.
You should also disable nozzle clamping detection and build plate position detection in printer settings→print options. Also disable nozzle clog detection feature (is useless as for me) in the slicer settings to use this mod. Just remove this piece from timelapse gcode
Upd. After testing it for some time I have found that the brush support is useless. So I have added v2 without it.
Boost Me (for free)
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (347)