cassiolandim

cover

WhatsApp Image 2025-01-28 at 17.22.43.jpeg

Screenshot 2025-01-28 175010.png

Screenshot 2025-01-28 174725.png

Screenshot 2025-01-28 174131.png

WhatsApp Image 2025-01-28 at 17.32.29.jpeg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

2025-01-28_6ac34dbb5d764.jpeg

<ul><li>Printed with 0.8mm nozzle to shorter printing time</li><li>3 loop wall</li><li>3.5% density 3D honeycomb infill</li><li>Textured PEI plate</li><li>Bed temperature 60 degrees</li><li>First layer bed temperature 63 degrees</li></ul>I added some cilinders to the bed plate, skirts to the part and raised bed temperature to 63 degrees to avoid warping and detaching from the bed plate during printing, but it still warped since I used PLA. I had to use some fillings with the glue when assembling the parts.I would recommend using PTEG and/or another type of plate for better adhesion.

0.8mm nozzle, 0.4mm layer, 3 walls, 3.5% infill

user_2816442338

1.jpg

2.jpg

Boquilla 0,4 mm Altura de capa de 0,28 Impresión con balsa Resistencia mejorada por paredx4Menos filamento.Velocidad standard 2 primeras capas después cambio de velocidad a Turbo. Menos tiempo.Con 3dlac en placa no se deforma ni levanta.

0.4 mm nozzle 0.28 mm layer height Printed with raft Enhanced wall strength x4Less filamentStandard speed for the first two layers, then switch to Turbo speed. Less timeWith 3dlac on the bed, no warping or lifting occurs

0.28mm layer, 3 walls, 4% infill

1 meter length shelf. I divided it into 5 parts with connectors and glued them together.

Cat wavy shelf

ASIA

Print Profile(2)

Description

Comment & Rating (15)

License

Related Models