Eternity Labs

cover

20250512_221251058_iOS.jpg

plate_1.png

AMS Profile - Minimal Colour Changes

EPS-3D

thumbnail_IMG_5360.jpg

200 % ca. 9x9x1.2 0.2mm layer, 2 walls, 5% infill

JohnyDang

IMG_5283.JPG

For easier movement for my printer since tolerance is different0.2mm layer, 3 walls, 10% infill

higher hole tolerance (3 walls, 10% gyroid infill)

3in Rescale PETG

RevHazlett

20250201_085000.jpg

20250201_081339.jpg

Screenshot 2025-02-04 125648.png

Screenshot 2025-02-04 010647.png

I wanted to print these a little larger, so I scaled them to be 3&#34; (73.5mm) wide. I was having a heck of a time getting the O&#39;s to print cleanly in PETG though, so I made a few changes:<ul><li>flipped the spinners so the X side was down on the plate, eliminating an internal body to hop over</li><li>oriented infill for the X so it&#39;d be a little cleaner</li><li>general quality settings (monotonic line solid internal infill, disabling reduce infill retraction, etc)</li><li>upped the bottom shell layers to match the top for symmetry</li><li>disabled EFC to improve the edge of the first layer of the spinners (preventing an overhang)</li><li>slowed the first layer down a bit (35mm/s) to get clean lines with PETG</li><li>general maximum linear speed of 150mm/s for cleaner results with PETG</li><li>rebuild flipper mesh to reduce amount of material changes (Xs and Os are only 0.6mm thick, three layers)</li></ul>There&#39;s four on the plate but three are disabled. You can turn on a few more if you want to get the most out of the filament swaps (third picture).&nbsp;If you carefully rearrange them you can get all four on an A1 Mini (see the last picture).&nbsp;Material 1 (BBL PETG Basic Red) is X&#39;s Material 2 (BBL PETG-HF White) is O&#39;s Material 3 (Flashforge Burnt Titanium PETG) is the body

PETG on textured PEI, 3-inch Size (161%)

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

The portable keychain version of Tic Tac Toe - Noughts and Crosses&nbsp;I hope you enjoy this model - Click the follow button next to my name to see more of my work! &nbsp;Ways to support my work &amp; Commercial Licences<ul><li>Give this model a like - it helps promote it to people!</li><li>Boost this model - if you enjoyed and printed it only!</li><li><a target="_blank" rel="noopener noreferrer ugc" href="https://www.patreon.com/Eternity3D">Sell Physical Prints of my Models </a>- Including supporting my work, access to exclusive models and more direct contact with me in the community!</li></ul>

Flip Tac Toe - X & O - Print in Place Game Fidget

ASIA

Print Profile(4)

Bill of Materials

Description

Comment & Rating (423)

License

Related Models