A1 Mini Build plate clip

DON'T PRINT IN PLA !  The PLA will melt and the clip will probably hit something.

Clip for A1 Mini to keep the build plate in place when printing a large piece.

If you want to print a large model and it starts to warp, there's a chance that your build plate will warp with it as well.
This clip is designed to hold the build plate in place to prevent that.

Please be sure to move your bed back and forth once installed to be sure that the clip don't hurt anything.  

It work perfectly on mine, maybe your A1 Mini may be slightly different.

Important : 

Here's my recommendations : 

So if you want to use the clip to print in PETG, you have to print the clip in a filament that are not really printable on A1 Mini… sorry for that…

From my test, the clips will bend if there are in PETG and you clip your build plate to print in PETG because the default temperature of the bed is 70c and heat deflection of PETG HF is 69c.

It is possible that BambuLab has made or will make modifications to the design of their build plate. I only have one A1 Mini, so I can't guarantee that this will fit yours 100%. On some models, the foam underneath may be thicker or thinner, or the poop chute may be closer or farther from the bed than on mine.

As you can see in picture, it fit on mine, so please don't leave a bad rating if it doesn't fit your printer. Instead, leave a comment and/or a photo explaining why it doesn’t work for you, so I can redesign it to fit yours as well. Thank you!