Bambu P1 Lubricant Oil Nozzle

This is a lubricant nozzle specifically designed for Bambu P1, aiming to make the maintenance of Bambu printers easier and more convenient. 

Simply install this nozzle on the Bambu lubricant tube, and you can extremely conveniently lubricate the lead screws of the Bambu printer. In daily use, proper lubrication of the lead screws is crucial for the stable operation and printing accuracy of the printer, and this nozzle exactly solves the trouble of inconvenient lubricant application.

I recommend adding the model to your favorites. When you need to maintain your 3D printer, you can quickly print this.

One user left a message to remind that for the lead screws, you need to use lubricant grease with a higher viscosity. After checking the wiki materials, I confirmed that what he said was also correct. Therefore, I'm going to quote the description of lead screw maintenance from the wiki here:

You can use the BX-300/F series grease in the link, but other lubrication alternatives can be used. A popular lubricant is Super Lube 92003 Silicone Lubricating Grease with PTFE or Lucas Oil 10533 White Lithium Grease which should work similarly.

Bambu Lab P1 系列打印机维护建议 |Bambu Lab 维基

如何润滑丝杠 |Bambu Lab 维基

Printing Tips: As some parts of the model have a small contact surface with the heated bed, they may detach from the heated bed during the printing process. To increase the printing success rate, please clean the printing plate with dish soap and spray glue before printing. Using a low - temperature warming printing plate can significantly enhance the printing success rate.

Feel free to leave a comment if you have any suggestions or questions about the model. When problems occur, please tell apart whether the issue is caused by the model itself, the printer, the filament, or improper operation and installation on your own part. I will block users who blindly attribute printing failures to the model and leave a one-star rating simply because they are unable to troubleshoot and fix problems by themselves. Such behavior greatly undermines the efforts of open-source creators.

有任何关于模型的建议或疑问，欢迎评论留言。出现问题时，请先区分原因：是模型本身、打印设备、耗材，还是个人操作与安装不当造成的。对于自身没有排查和解决问题的能力，却一味将打印失败归咎于模型并给出一星差评的用户，我将进行拉黑处理。这类行为会严重辜负开源创作者的心血与付出。