Nintendo Joycon Replacement Shells

Optimised the already excellent model by Neybao for Bambu printers.

Please delete as appropriate the internal battery supports if not needed.  
 

I have found that the primary failure mode for this model is the screw-down points used to secure the back shell to the internals.  I suggest care on tightening the 4 external (Y0) screws on closure.  I added a smear of superglue (EXTERNALLY) to these screw-down points to reduce the risk of shearing.

To open a Joycon you will need a Y0 security driver.

For detailed advice on the Right (+) shell replacement:

https://www.ifixit.com/Guide/Nintendo+Switch+Right+Joy-Con+Shell+Replacement/130386

For detailed advice on the Left (-) shell replacement:

https://www.ifixit.com/Guide/Nintendo+Switch+Left+Joy-Con+Shell+Replacement/130378

Reuse Reduce Recycle and happy gaming!