Print Profile(4)
Bill of Materials
Description
| Huge thanks to everyone — your support is what keeps me creating! If you enjoy my designs, a like or follow means a lot and helps me keep going. |
Now you can hang up a wall clock that is inspired by the popular MoonSwatch!
Assembly instructions
The bezel and dial can be joined without screws. Align both parts carefully, then push them firmly together.
For the second hand, first remove the small black pin (marked in red) from the clock kit’s second hand. Then push the black pin through the printed second hand. Finally, assemble the hands on the clock kit in the order shown in the picture.
To achieve a glowing effect on the hour markers as shown, simply use glow instead of yellow filament.
Attention!
To print the bezel flawlessly, you have to remove the purge line directly after calibration or disable it completely. Otherwise it will interfere with the printed object and leave a mark.
Please note that this model has been shared for non-commercial, personal use only.
Also check out my other wall clocks:
https://makerworld.com/collections/5716233-wall-clock-collection
If you value my work and would like to continue supporting me, you could buy me a coffee.
Any help is appreciated!
Boost Me (for free)
If you have extra boosts to spare, I’d truly appreciate your support. Your boost will help me continue sharing unique, niche models for the community to enjoy. Thank you very much!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (235)