ABXY Face Buttons for Xbox

Print custom ABXY buttons for Xbox!  They actually have the same underside as origional xbox buttons, which means you can still use them with extremerate's clicky button kit!

THESE ARE NOT THE BUTTONS WE USE FOR OUR MOUSE-CLICK FACE BUTTONS, Those are multi-part resin printed and are MUCH higher quality. 

This model is PRESUPPORTED.  The only way for me to retain the underside was to design my own supports for them.  Basically it utilizes the idea that 2 materials (PLA and Support for PLA in my case) separate easily if sliced with a tiny gap between them.  You can also use PLA and PETG, or PLA and TPU for AMS.   So whatever the 2 materials your using that DONT BOND WELL, assign one to the buttons, Letters, Platforms, and Skirt (PLA in my case).  Then assign the other one to the “Transition Materials” under each button (Support for PLA in my case).  You can easily change the colors of the letters if you want.  The supports are designed for printing 0.10mm Layer Height with a 0.2mm Nozzle.  For me, this results in the ability to pop off the buttons from the platforms with barely any force.

I highly recommend a 0.2mm Nozzle, I wasn't happy with the results using a 0.4

I'll try to add a 0.06mm Layer Height profile when I have time, I'll probably need to adjust the tiny space in between the materials for it to still work as good as it does at 0.10mm.

Check out my other custom controller related prints!

Custom Adjustable Tension Stick Bases: https://makerworld.com/en/models/1077852#profileId-1069035

Elite Series 2 Stick Set: https://makerworld.com/en/models/872242#profileId-824358