Paint Brush Stand MkII
Print Profile(1)
Description
The Paint Brush Stand MkII takes the hex design to the next level, creating an enclosed stand to keep your paint brush from falling through/out of the stand. Print the brush holder face down so that supports are not needed.
I would recommend printing with 3 top/bottom layers and 3 walls, with 15% infill of your choice (I like gyroid myself).
The Paint Brush Stand MkII prints in 2 parts. To combine the parts together, line up the ridge along one of the long edges of the insert with the gap along the bottom edge of the stand. Then gently push the top of the insert into the ridge along the top inside edge of the stand.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)