Fletch

cover

PXL_20250208_195733806.NIGHT.jpg

PXL_20250208_230511717.MP.jpg

PXL_20250210_014039558~2.jpg

PXL_20250208_195908108.NIGHT.jpg

PXL_20250208_195931910.NIGHT.jpg

plate_1.png

2025-02-08_182059a72f5c18.jpg

<ul><li>No bearing required</li><li>0.2mm layer height</li></ul>

Fidget Spinner - No Bearing

PXL_20250208_230539376.MP.jpg

PXL_20250208_230809664.MP.jpg

<ul><li>Uses a 608zz bearing</li><li>Slightly larger</li><li>0.2mm layer height</li></ul>

Fidget Spinner - 608zz Bearing

<ul><li>Print in place bearing</li><li>Slightly larger</li></ul>

Fidgets Spinner - Print In Place Bearing

MooreDimensions

PETG - UHD FIDGET SPINNER.jpg

settings 1.jpg

settings 2.jpg

settings 3.jpg

Optimized Ultra High Definition PETG Print!  Loved the print so much I tweaked it to be near perfect with PETG (without printing dozens of them haha!) Printed by object on P1S for better layer lines and print quality of each piece (add a little bit of extra time), so should work well with both P1P and X1, possibly well with A1 and A1 Mini too, but would need testing…  Settings should be attached to the print profile, but I have attached all photos of setting differences from stock ones for P1S - PETG Generic - 0.12mm HQ  <ul><li>The Quiet Start profile was for late night printing if I&#39;d already printed recently and the printer hadn&#39;t been turned off, it saves like 4 mins, but if you want to do auto calibration checks just delete the semi colons ( ; ) in the G code for Bed Leveling and Mech Mode Fast Check values (not the descriptors). To save some time if you feel the print is too long to wait for 1 perfect print, you could always add a second and or third fidget to the plate and print 3 at once !?</li></ul>Also add some oil to the print in bearing

PETG - 0.12mm Perfect UHD Settings Print-in-place Bearing

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoy this model, your support is much appreciated!</boostcontent></boostme>So many fidget spinners, I wanted to make one that is quick and easy to print. This fidget spinner works by flicking the center gear so that it spins around the base. Can be used with one or two hands. Hold the fidget spinner with your thumb and middle finger, use your index finger to flick away.&nbsp;I recommend not using a matte filament since they are bit more rough.&nbsp;Measures 32mm in diameter by about 12mm tall.&nbsp;If you want to print this fidget in multi color you can move the gear to another plate if using the slicer on PC or select individual models to print if using the app.

Print Profile(4)

Description

Comment & Rating (203)

License

Related Models

Flick Fidget Spinner

Print Profile(4)

Description

Comment & Rating (203)

License

Related Models