Foldable Razor Blade Holder
Print Profile(2)
Description
Foldable holder for two sided razor blades. Print in place, no need for support. The foldable top cover has a snap function, that locks the holder and the top cover in place. Print with 0,08 mm layer height, so the threads are workable.
I have made version 2 with a stronger hinge and additional clearance. Version 1 is still up, marked V1. I have teste version 2 and the hinge worked well. Remark: The best results will come from a printer calibrated with the filament, dry filament, and a true-to-size filament type.
CAUTION: Be very careful when handling and using razor blades.
USE: Place the razor blade in the holder with two tabs, and put the printable plate on top of the razor blade. Use the bolt with threads too screw down the plate and the razor blade.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (55)