Search models, users, collections, and posts
Rigid 4512 saw alignment tool
IP Report
Print Profile(1)
0.24mm layer, 2 walls, 15% infill
Designer
38 min
1 plate
Open in Bambu Studio
Boost
165
622
34
8
361
228
Released
Description
Rigid 4512 table saw alignment jig. This may work for other saws but is built for the rigid 4512. uses a printed alignment key, two m4x10mm socket head screws one m4x15mm socket head screw, nut and two washers. The micrometer was sourced from amazon.
Assemble then slid the jig into miter slot pick a spot on the front of the blade put a dot with a sharpie. Zero gauge on that spot then slide the jig to the back of the blade, spin the blade so the spot you made in the front aligns in the back with the gauge. Note the difference from the front to the back and adjust the saw accordingly.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (34)