A Minion adorning the front of the extruder. - Free 3D Print Model

Search models, users, collections, and posts

Wojciech Kawa

3D Printer>3D Printer Parts

IP Report

Print Profile(5)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

56 min

1 plate

4.8(80)

Strong top fasteners, 0.2mm layer, 2 walls, 15% infill

Designer

57 min

1 plate

4.8(46)

(Eye Color Correction) 0.16mm layer, 4 walls, 15% infill

59 min

1 plate

5.0(4)

For Generic PLA (blu eye)_0.16mm layer, 2 walls, 10% infill

1.1 h

1 plate

5.0(4)

Click to see more

Open in Bambu Studio

Boost

1751

3065

245

337

3.6 k

2.8 k

Released

Description

A Minion on the front of the extruder that rolls one eye while printing.

Minion on the front of the extruder

Please use my profile for printing as I spent some time on it to make sure the print turns out as good as possible.

Let me know if the print was successful and if everything fits. If any corrections need to be made, let me know.
If you have printed it, please leave a rating.
Before installation, the original front and the rotating element must be dismantled.
During installation, the eye should be pressed as far as it will go. After putting the face, the eye should be flush with the face or deeper.
When assembling, make sure that the top latches are flush with the top edge before pressing from the front.

If you think that standard hooks are too weak and may break, print a version with reinforced fasteners.
You will see details in the photos below.

Boost Me (for free)

Hey! If you like my 3D models, I’d really appreciate it if you hit Boost! 🚀
It’s a big motivation for me to keep creating and sharing new projects with the community.
Every Boost shows it’s worth it – thank you! 🙏

See my other projects.

Assembly instructions below. (same as Funy Face)