Diamond Painting 5er Garage Version 2
Print Profile(1)
Description
5-Piece Diamond Painting Garage with Magnetic Insert
Version 2 - 50% Weight Reduction
Due to the excessive weight of the solid-material variant (Version 1) of the garage and the resulting filament waste, I have created a “light” version for my garages.
Garage Version 2 boasts approximately a 50% weight reduction compared to Version 1, thus significantly conserving filament.
Functionality, dimensions, and magnetic inserts remain identical to Version 1.
Printing Note: I have adjusted the overhang and bridging speeds, slowing them down for optimal bridge/overhang creation.
Suitable dimensions for trays fitting the garage:
- Width 70 mm
- Height 17 mm
My diamond painting trays are also available on my page or directly via this link: https://makerworld.com/de/models/1079761#profileId-1071315
The garage features recesses for magnets with the following specifications:
- Maximum 10mm diameter (the recesses are square with dimensions 10.3 x 10.3 mm)
- Maximum thickness 2mm (with appropriate tolerance)
- Magnets should be neodymium with at least an “N42” classification for adequate hold.
I currently use these, for example: https://www.amazon.de/dp/B06X977K8L
A pause should be inserted in the slicer at layer 19 to allow for magnet insertion. The slicer will show the holes as already closed, but the pause is implemented at the beginning of layer 19, with the holes closing only at the end of layer 19.
Feel free to share any suggestions :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)