Print Profile(2)
Description
Description:
This monitor riser comprises a robust oak wood plate and two sturdy supports (left/right). The supports can be affixed to the wood plate in two ways.
- Version A: Lateral attachment using M6 cylinder screws
- ✓ Premium aesthetic achieved through metal screws
- ✗ More complex assembly due to wooden bushings
- Version B: Lateral attachment using wood screws
- ✓ Quick & easy assembly
Further details are provided below.
Optional: Storage Tray:
An additional storage tray can be mounted beneath the wood plate (attachment using 4 x 16 mm wood screws).
It consists of two interlocking parts and offers:
- Dual compartmentalization in DIN A4 format
- Matching design to the supports
- Space for documents, small folders, or electronic devices (e.g., tablets, docking stations)
- Open construction for straightforward cable management
Height increase of 98 mm
Assembly drawing in the appendix
Wood plate dimensions:
- Thickness: 18 mm
- Depth: 270 mm
- Width: 400 mm (customizable)
- Suitable for: 17-inch laptop
- Plate drawing in the appendix (for Version A)
Supports:
Each support (left/right) consists of two precisely fitting parts that interlock like a puzzle.
--------------------------------------------------------------------------------------------------
Screw Attachment Version A – M6 Cylinder Screws
- 8x M6 cylinder screws with M6 x 15 wooden bushings (Amazon link)
- Drill holes in the plate:
- Diameter: 10 - 10.5 mm
- Supports serve as drilling templates
Assembly:
- Interlock supports
- Position against the plate & mark drill holes
- Drill with a 10 mm drill bit
- Insert wooden bushings
- Screw supports to the wood plate
- Finished!
----------------------------------------------------------------------------------------------------
Screw Attachment Version B – Wood Screws
- 8 wood screws (e.g., 4 x 25 mm)
- Pre-drilling recommended (depending on wood type)
Assembly:
- Interlock supports
- Position against the plate and use as a drilling template if necessary
- Screw together with wood screws
- Finished!
-------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------
Notes on 3D Printing:
- Support: Required
- Infill: 15% infill
- Wall lines: 4 wall lines (3 wall lines also sufficient)
Documentation (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (22)