Sideways Air Vent Deflector
Print Profile(4)
Description
Membership
Commercial License Now Available!
Horizontal Air Vent Deflector for redirecting heat and air sideways
Redirects forced hot air and central ac sideways instead of straight out. Attaches to the metal floor grate using six 8x2mm magnets (Makers Supply CA005). The magnet holes have a .25mm tolerance, so it may or may not be friction fit depending on how much shrinkage you experience. I printed with PETG-HF and used a drop of CA glue for each magnet.
The vent cover is 256 x 126.16 mm (approximately 10"x5" ) with an inside channel width of 89mm (approximately 3.5"); the metal registers in the photo measure 11.5" x 5.25"
I've added an additional profile for the A1 Mini which reduces the length of the cover to 180mm (approximately 7" long); the other dimensions are the same as the original.
Boost Me (for free)
If you find my models useful or helpful and would like to encourage me to continue creating, please consider giving me a boost!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (88)