Build plate, identification code, simultaneously test your printer accuracy, X series laser scan identification build plate used

Friends, friends! The moment to test your printer's precision has arrived!!!

The judging referee is the lidar AI identification system built into the Bambu X series, ensuring fairness and impartiality. 🤣🤣🤣

The identification code on my build plate, due to prolonged use, has worn down to the point of unidentifiability.

I tried using a marker pen, but the liquid flowed along the texture of the build plate, making it difficult to form a clear mark, so I simply modeled and 3D printed a replacement.

Real-world testing shows successful identification, and the relevant video has been uploaded to Bilibili.

I used a 0.4 nozzle, and the printed identification code appears somewhat rough, but it still meets the lidar's identification standards.

If you use a 0.2 nozzle, the results will undoubtedly be even more exquisite.

Use glue or double-sided tape to secure it to the corresponding position on the build plate.

For long-term use, 3M's high-temperature resistant, ultra-thin double-sided tape is recommended, readily available on various platforms.

The model consists of only three layers, printable even without AMS. A pause and filament change can be added after the first layer, using dark material for the base and light material for the subsequent identification code.