Print Profile(1)
Description
Taylor Swift!!
I have crafted a Taylor Swift Hueforge using only the three most common colors, black, gray, and white, and the result is incredibly captivating!
One could also substitute gray with red or blue for an even more distinctive effect.
The image can be resized, but remember to modify ONLY the X and Y values. DO NOT RESIZE THE Z-AXIS.
If using an AMS, the project is already configured with appropriate filament changes and layer settings; however, I provide the Hueforge details below.
Print at 100% infill with a 0.08mm layer height and a 0.16mm base layer.
The model measures 200x180.7mm.
Higher layer heights may be used below the minimum depth of 0.48mm.
The maximum depth is 2.2mm, and the actual depth is 2.3mm.
Filaments Used:
Bambu Lab PLA Basic Black Transmission Distance: 0.6
Bambu Lab PLA Basic Gray Transmission Distance: 3
Bambu Lab PLA Basic White Transmission Distance: 5
This print utilizes three distinct filaments.
Swap Instructions:
Begin with Black
At layer #9 (0.8mm), switch to Gray
At layer #11 (0.96mm), switch to White for the remainder.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (19)