Stripping and cutting wires using original Bambu Lab blades
Print Profile(2)
Description
Using Bambu Lab Official Stripping and Cutting Wire Tools
=======================================================================================
This wire stripper uses the blade and screws included with Bambu Lab, and no other accessories are required.
Tested to quickly strip wires as small as 0.6mm, it can also strip network cables and has been successfully tested on Teflon tubing as well.
The blade placement has extra space to accommodate variations in blade sizes from different batches.
=======================================================================================
The cover plate can be omitted if you have shorter screws, primarily for concealing the length of the original Bambu Lab screws.
Note: The blade is installed at an angle; the model has been adjusted accordingly. The rear of the blade rests against the recess; the left-right position can be adjusted slightly depending on the print.
Boost Me (for free)
With your support, we strive for excellence. For original editable models, please message.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)