US General Series 3 & ICON Corner Tray Inserts
Print Profile(6)
Description
All Compatible Lightbox Frames & Mounts Available Here!
🛠️ Recommended Gear
Check out my Amazon Storefront by clicking here!
Bed Adhesion (Fix First Layer Issues) Magnets (for optional mounts)
Recommended LED Light Strips Battery Powered LED Light Strips Double Sided Tape for Lens: Optional
Custom One-Off Designs Available - CLICK HERE
Printing tips are located at the bottom of this listing
___________________________________________________________________________
This was designed around the US General Series 3 drawers. It might fit other series and the carts but not positive. If you find it does, please comment and let me know.
***UPDATE: These have been confirmed to also fit the Husky toolbox drawers.
***UPDATE: I was informed by another member that these do fit the Mastercraft series of toolboxes as well sold at Menards.
***UPDATE: These have been confirmed to also fit the ICON drawers.
No modifications needed! It slips on over the rear corners and is 1" deep.
Large Trays are 8" x 10"
Small trays are 6" x 7"
Look for other US General Items here as I will be adding different size trays in the near future.
_________________________________________________________________________________________________
Thanks for downloading from Chopper Originals.
If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.
___________________________________________________________________________________
Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.
____________________________________________________________________________________
Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***
If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (95)