Search models, users, collections, and posts

IP Report

Print Profile(3)

All

A1 mini

X1E

X1 Carbon

P1S

P1P

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 1 walls, 0% infill

1.2 h

2 plates

4.9(134)

0.16mm layer, 1 walls, 0% infill

1.2 h

2 plates

4.9(37)

A1 Mini 0.08mm layer, 1 walls, 0% infill

1.2 h

2 plates

4.9(7)

Open in Bambu Studio

Boost

326

1242

207

2.4 k

1.5 k

Released

Description

Content has been automatically translated.

Show original

Summary

Lampshade compatible with Herrnhuter star size 1
Adapter diameter Ø12,8 mm.
Adapter needs to be glued in place.

Lampshade compatible with Herrnhuter star size 1
Adapter diameter Ø12,8 mm.
The adapter must be glued in place.

Print Settings

Printer Brand:

Anycubic

                                            Printer:                      
i3 Mega S/Pro

Rafts:

                                            Supports:                      
No

Resolution:

0,2

                Filament: Anycubic PETG                white                    
                        Notes:                     
Printed in vase mode, line width 0,6 mm, ensure to deselect "remove holes" (net repair option within Cura). I used 6 bottom layers. Check the flow rate of the first 40 layers; it should be the same as in the higher layers. In Orca, you need to deselect "slow down for overhangs".
Printed in vase mode with a line width of 0,6 mm. To print, "remove all holes" must be removed in the net repairs section (Cura). I used 6 bottom layers. Pay attention to the flow rate in the lower 40 layers. It should be the same in all layers. In Orca, you have to deactivate "slow down for overhangs".