Search models, users, collections, and posts
2020 Aluminum Profile Adjustable Screw-Fixed Support Feet
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
21 min
1 plate
Non-slip texture version
Designer
18 min
1 plate
Open in Bambu Studio
Boost
13
51
0
0
28
15
Released
Description
Content has been automatically translated.
Everyday 2020 aluminum extrusion feet, adjustable height, secured with M6 screws.
Printing Instructions
- Before printing with default settings, ensure the build plate is thoroughly cleaned. If stringing occurs, consider adding a brim or applying adhesive to the build plate.
Usage Instructions
- Requires M6 screws; both hex socket and hex head screws are suitable. A minimum length of 30mm (typically 50mm) is recommended. The diameter should not exceed 14mm, and the thickness of the M6 flat washer should not exceed 2mm. Thicker M6 nuts are preferable.
- The foot is approximately 23mm high and has a 40mm base diameter.
- The default configuration features an anti-slip texture for direct use. Versions without this texture are suitable for additional anti-slip pads.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)