Pegboard Filament Shelf Rack

I looked around for a few but none actually fit the thicker pegboard holders I got from Home Depot. I remixed this from HDVPrintfarm but I basically had to make the model from scratch. 

The brackets use 3/4'' electrical conduit and 6'' pegboards hooks, there are holes for you to use m3 screws but I did not use it on mine at all and it has not budged. 

-Printed in PLA without issue. 

-0.2mm layer height

-Supports required

-This was printed on an A1 Mini build plate

These are the Heavier Duty pegboard hooks I got from Home Depot. I bought them individually locally. The link is for a bulk listing. I was unable to find the individual listing. You should be able to use other pegboard hooks as well and even longer than 6" since I made a pass-through hole to accomodate longer hooks. 

https://www.homedepot.com/p/Presa-6-in-Black-Steel-Pegboard-Hooks-for-1-4-in-Pegboards-50-Piece-PS41206-50PK/313944303

Here is the listing for the ¾" electrical conduit listing from Home Depot as well. 

https://www.homedepot.com/p/Wheatland-Tube-3-4-in-x-5-ft-Electrical-Metallic-Tubing-EMT-Steel-Conduit-0550105000/202068070

I know someone might ask so link for the Black Metal 12"x24" pegboard is below. They are screwed into wall studs and does not flex or budge at all. 

https://www.amazon.com/Ultrawall-Pegboard-Panels-Boards-Storage/dp/B0CB63RQNB?dib=eyJ2IjoiMSJ9.bVhrph6TVbJyHklO9DOEo0-knifr8eI5_vCxMh94nhjL1GHAAk75vClWEHSKlHJp0VW0lsrZKstUVs8ZdVIMWucKUAg8VLBwhDNh7ts-Xx3arprYWGfEPhyRj9j6CJrfP22x7tgZKmYqKCqQv2i-FC97uQgZz-TwTKFCPLfIUIbrdVTISuxdqPwXIqz00btowaHAEvcAewo8hdrb0t6uOIm-KTIiUzrHQ5cSP-PsmjA.mi_77njes2N-IlBX5FALRUnYhLmlNMCJAWjz5ILPGX4&dib_tag=se&keywords=metal+pegboard&mfadid=adm&qid=1739944380&sr=8-3