Car fuse box (print in place)

An elegant and practical way to store 16 of the standard size (19mm high) car fuses. The print orientation of the lid gives it either a smooth or fuzzy appearance without the normal top layer texture.

I have made three versions of it with text in different languages (English, Swedish, German). If you want to have text in your language, just comment and I will add it.

The fuzzy texture is a nice way to hide the layer texture. It is achieved by some dialing of the slicer settings, which are described in detail below. 

Also check out my fuse box for small fuses:

CAR FUSE BOX for mini fuses (print in place) by Ignote MakerWorld: Download Free 3D Models

Smooth lid:

Simply delete the Fuzzy Overlay part in the slicer before printing.

Fuzzy lid:

Step 1

Open the file in your chosen slicer (Bambu Studio, Orca Slicer or one of their derivatives).

Step 2

Select all 3 parts and right click on them, select Merge

Step 3

Right click on the Fuzzy Overlay, select Change Type

Step 4

Click on the drop-down menu labelled Part, select Modifier.

Step 5

Go to the Others tab

Step 6

Click on the drop-down menu labelled None, select one of the options (e.g. Contour). This setting will not affect the result in this case.

Step 7

You can play around with the Fuzzy skin point distance value to control the degree of fuzziness. I used 0,1 mm.

Step 8

Slice and print the file as usual. The sliced file should look like the one below: