Shiji Niangniang Magnetic Adsorption Magic Mirror/Selfie Mirror (Magsafe compatible)
Print Profile(1)
Description
Boost Me (for free)
Creating original content takes considerable effort, thank you for your support
The embedded magnets must use the reverse-polarity magnetic rings shown in the image; otherwise, they will not adhere to the back of the phone.
Mirror: 50mm diameter, 1mm thickness
Layer Height: A 0.2mm layer height is recommended for fewer color changes
Nozzle: A 0.2mm nozzle is recommended. I used a 0.4mm nozzle in the image, which worked adequately
Material: Using the same brand of PLA filament is recommended. Different brands may exhibit varying adhesion properties, potentially leading to delamination during multi-color prints
Build Plate: A low-temperature build plate without texture is recommended. Textured PEI plates somewhat impede adhesion between the upper and lower sections
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)