Vertical Track Changer - Brio compatible
Print Profile(1)
Description
This is a BRIO compatible track changer. Instead of the typical turn tables, or branches, it provides a way to switch a train between an upper and lower track section!
The model has been designed to be compatible with standard track pieces; height and lengths should work well with common track pieces.
Assembly:
- Attach the upper and lower landings to the guides with super glue in the pockets of the tracks.
- Attach the guide pegs to the main piece of track into through the guides, attaching to the center track with super glue in the provided holes.
Edit from comments received:
Some of the larger battery trains can't get up the ramp. Does not work with the large battery trains with three or four pairs of wheels (like the BRIO 33630, or the 33971). The ramp is too steep and the drive wheel then loses contact right in the bend.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (23)