Championship Trophy
Print Profile(2)
Bill of Materials
Description
Championship Trophy!!
This trophy was modeled after the Jeopardy College National Champion Trophy. My wife was putting on a Jeopardy event and asked if I could make a trophy for it.
Trophy as printed stands over 22 inches tall!
The base lid and middle of the trophy are put together with the nut and bolt in the print. The nut is press fit into the top of the base lid. I taped the bolt to a long screw driver to get it through the bottom hole of the trophy middle.
Top outside ring is press fit into the Top base. Top base is press fit to top of trophy middle.
Glue used to lock the rings in place. Coat hanger used to put the sign in the middle of the rings, holes are provided through the rings.
Added print profile for the middle nameplate. Just add your own text in bambu slicer or make a sign in Makerlab. Demissions of the nameplate 39.8x117x7mm. Add a negative cylinder to the name plate in bambu labs for the coat hanger.
License
Comment & Rating (5)