Demon Slayer - Giyu Tomioka Hueforge - Free 3D Print Model

Search models, users, collections, and posts

Aus404

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

6.6 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

Released

Description

There is a distinct lack of Giyu on here or as my sister likes to affectionally call him “Sad Boy,” so I decided to make my own HueForge of him. Hope you enjoy it!

Project: GiyuWater.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 143.61x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Gray
    At layer #15 (1.28mm) swap to Blue
    At layer #20 (1.68mm) swap to Red
    At layer #21 (1.76mm) swap to Jade White for the rest.

Credit: Shoutout to Metaleks for the artwork.

To view his other works, check out his website: https://metaleks.com/

demon slayer

demon slayer hueforge