Customizable Stash Box

Customize

To customize this model, please use the “Customize” button. Please feel free to add your design as a print profile/remix to this page!

Convert Images to SVGs to use on your version of the model! Plenty of free resources online to convert image files to SVGs, I've personally used https://picsvg.com/ with good success. For that site, you can use the “Filters” option after uploading a picture to get the correct SVG output you're looking for. 

Purposely designed so that the entire print would fit on a single build plate!

Store whatever you'd like in this customizable box ;) Choose between one or two latches, modify the internal cutouts of the box, customize the slide out top, even add your own text and images.  Latch design is based off of @Hugo's fantastic snaplocks. 

With this customizable design you can:

• Change the box layout/design!
  • Pick between 0 and 6 even or unevenly sized sections for within the box from the “Interior Box Sections” drop down.
  • Choose either 1 latch or 2 latches to lock the box when closed.
  • From the “Custom Slide Cutout” drop down, you can which slide design you prefer. Will be adding additional designs in the future or per request! 
  • Does not currently support adjusting the box height up and down. Will be adding the ability to adjust box height in the future!
• Write custom text on the front of the box, the lid, and even hidden on the bottom!
  • All sides have their own Font selection. Front and lid can have a total of 4 lines of text, each line can be sized as big or small as you'd like, and can be moved up, down, left and right.
  • 
  • IMPORTANT NOTE: Be careful NOT to place text and images behind the latch locks on the front of the box.
  • 
• Pick and choose which sides you'd like to customize
  • At the top of each line of settings, you have a switch to turn off or on the options for that side.
  • 
• Upload any SVG, size and position it as needed!
  • Can add SVG files to either the front or lid of the model.
  • Under the SVG Settings drop down, you'll see the ability to resize the image, move it up, down, left, right, and even rotate each SVG.
• M̶u̶l̶t̶i̶-̶c̶o̶l̶o̶r̶ ̶P̶r̶i̶n̶t̶i̶n̶g̶ ̶D̶o̶e̶s̶ ̶N̶O̶T̶ ̶c̶u̶r̶r̶e̶n̶t̶l̶y̶ ̶w̶o̶r̶k̶
  • T̶h̶i̶s̶ ̶a̶p̶p̶e̶a̶r̶s̶ ̶t̶o̶ ̶b̶e̶ ̶a̶ ̶b̶u̶g̶ ̶i̶n̶ ̶M̶a̶k̶e̶r̶L̶a̶b̶'̶s̶ ̶P̶a̶r̶a̶m̶e̶t̶r̶i̶c̶ ̶M̶o̶d̶e̶l̶ ̶M̶a̶k̶e̶r̶.̶ ̶D̶e̶s̶p̶i̶t̶e̶ ̶t̶h̶e̶ ̶f̶a̶c̶t̶ ̶t̶h̶a̶t̶ ̶t̶h̶e̶ ̶e̶n̶t̶i̶r̶e̶ ̶b̶u̶i̶l̶d̶ ̶f̶i̶t̶s̶ ̶i̶n̶ ̶o̶n̶e̶ ̶b̶u̶i̶l̶d̶ ̶p̶l̶a̶t̶e̶,̶ ̶e̶v̶e̶n̶ ̶w̶h̶e̶n̶ ̶a̶c̶c̶o̶u̶n̶t̶i̶n̶g̶ ̶f̶o̶r̶ ̶t̶h̶e̶ ̶e̶x̶c̶l̶u̶s̶i̶o̶n̶ ̶a̶r̶e̶a̶(̶P̶1̶ ̶&̶ ̶X̶1̶)̶ ̶a̶n̶d̶ ̶p̶u̶r̶g̶e̶ ̶t̶o̶w̶e̶r̶,̶ ̶w̶h̶e̶n̶ ̶a̶t̶t̶e̶m̶p̶t̶i̶n̶g̶ ̶t̶o̶ ̶d̶o̶w̶n̶l̶o̶a̶d̶ ̶t̶h̶e̶ ̶.̶3̶M̶F̶ ̶y̶o̶u̶'̶l̶l̶ ̶g̶e̶t̶ ̶a̶n̶ ̶e̶r̶r̶o̶r̶ ̶s̶t̶a̶t̶i̶n̶g̶ ̶“̶t̶h̶e̶ ̶m̶o̶d̶e̶l̶ ̶i̶s̶ ̶t̶o̶o̶ ̶l̶a̶r̶g̶e̶ ̶t̶o̶ ̶f̶i̶t̶ ̶i̶n̶ ̶p̶l̶a̶t̶e̶”̶.̶ ̶
  • This is no longer the case, Bambu fixed the issue with Makerlab and you should now be able to download the .3mf with the different colors applied to text and images. I have not print tested this. I don't currently have a multicolor printer to verify how well it would print.
  • 

Attaching the latches:

• Push and twist the latches into the slots, as seen below:
  • 
• Make sure the latches are oriented correctly, see below picture for reference:
  • 

Printing Recommendations:

• I've had no issues printing with the standard 0.20mm print settings settings. PETG/PETG HF prints very nicely.
• For more intricate text or detailed SVGs would recommend going to 0.16 High Quality.

Please feel free to comment or message me with any suggestions or improvements!