iPhone 13 Pro Slim Case PETG

iPhone 13 Pro Slim Case for materials such as PETG/PLA.

The case is printed in two parts; the camera protection ring is printed separately and then inserted into the case, thus keeping the case very slim overall. Despite the thin shell, a MagSafe magnetic ring can be used; it should not be thicker than 1mm. The side walls are only 1.2mm, the back only 1.5mm thick.

Caution! This is explicitly a slim case, meaning it only offers limited protection against falls, for example. For better protection, I recommend a case designed for printing with TPU, which are of course usually considerably thicker, which I don't like so much. This case is not suitable for printing with TPU.

Although both are possible, I recommend printing with PETG instead of PLA. My iPhone does get quite hot sometimes, and a PLA case may warp; additionally, PETG does not break as easily as PLA. No support is needed during printing.

Equipped with a MagSafe ring, the iPhone with the case does not adhere quite as well to my MagSafe charger as an original case, but in my opinion still sufficiently well.

The images show prints with the following materials:

• Bambu Lab PLA Metal Iridiumgoldmetallic
• Overture PLA Rock White (I love this material; hardly any layer lines visible, great feel, also available as PETG)
• The filament PLA Grüngold
• Extrudr PETG Bronze

Have fun printing!