Print Profile(6)
Description
This is the Clover, a uniquely patterned pegboard that I designed, that's compatible with most IKEA Skadis attachments (except T clips). It is lightweight yet strong. You can hang it to a wall with Command Strips for damage free attachment, other double sided tapes, or just with old fashion screws.
Assembly is super easy and does not require any tools, well, unless you need to take it apart.
It is designed for infinite expansion as far as space allows, and with no lost holes.
Instructions and parts:
Align the connector at the corner of the panel, and push tab to a click to lock panel in place. The cap should be almost flat with the front face with a slight protrusion.
In case you need to detach, simply twist at the inner gap with a small flat head, then slowly pry it out.
Place attachments vertically because horizontal attachment will block the 2 points above.
you can add as many connections as you like to achieve the desired strength. I personally only use the corners as connections.
double sided tape connector
Scroll down in the print profile you'll find this connector that give you a bigger base to apply double sided tape.
Comment and feedbacks are appreciated.
*Updated 3/13/2026: Improved attachment with no lost points
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (49)