Double Dragon NES Hueforge Poster

No AMS needed, you can manually set pauses at filament changes.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 146.41x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Red
    At layer #11 (0.96mm) swap to Yellow
    At layer #15 (1.28mm) swap to White for the rest.