AcaSnake

cover

7.jpg

2.jpg

6.jpg

4.jpg

Screenshot_1.png

Screenshot_2.png

plate_1.png

20250223_215321.jpg

0.2mm layer, 3 walls, 10% infill

2025-02-23_a502cdbe0e1a.jpg

altezza layer 0.2riempimento 10%loop pareti 3supporti si alberobrim a scelta in base al materiale utilizzatofuzzy skin 0.4/0.2

Layer height 0.2Infill 10%Wall loops 3Supports tree supportBrim optional depending on the material usedFuzzy skin 0.4/0.2

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Oggi mi sono voluto cimentare in questa simpatica miniatura basandomi da una semplice foto.Ho utilizzato la tecnica fuzzyskin per rendere la superfice piu&#39; gradevole da vedere.Ho aggiunto una piccola modifica nella parte anteriore per la rimozione semplificata dei supporti.Dimenticavo stampo esclusivamente con abs ma potete usare pla<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Se avete piacere di supportarmi grazie!</boostcontent></boostme>

Today I wanted to try my hand at this cute miniature based on a simple photo.I used the fuzzyskin technique to make the surface more pleasant to look at.I added a small modification to the front for simplified support removal.I forgot, I print exclusively with ABS, but you can use PLA<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you would like to support me, thank you!</boostcontent></boostme>

Print Profile(2)

Bill of Materials

Description

Comment & Rating (4)

License